New & Featured Products

Featured Product

More Info...

Featured Product

Energy Statement July 09 Hi there More Info...

New Products

BZ-150 Universal Voltage Power Pack The BZ-150 Universal Voltage Power Pack is full featured and can provide 24 VDC operating voltage to WattStopper’s low-voltage occupancy sensors. In addition, the BZ-150 enables manual-on, hold-on, hold-off and load shed applications when used with lighting control panels or building management systems. This device is constructed with environmentally friendly materials and is RoHS-compliant.

BZ-50 Universal Voltage Power Pack The BZ-50 Universal Voltage Power Pack provides 24 VDC operating voltage to WattStopper’s low-voltage occupancy sensors. This device is constructed with environmentally friendly materials and is RoHS-compliant.

CD-250 PIR Dimming Multi-way Wall Switch Vacancy Sensor The CD-250 PIR Dimming Multi-way Vacancy Sensor provides preset dimming control and automatic lighting shutoff for applications in the home including those with multiple switch locations. It is engineered to comply with California’s Title 24-2008 residential energy code.

CH-250 PIR Multi-way Wall Switch Vacancy Sensor The CH-250 Passive Infrared (PIR) Multi-way Vacancy Sensor provides automatic lighting shutoff for applications in the home including those with multiple switch locations. It is engineered to comply with California’s Title 24-2008 residential energy code.

CS-350-N PIR Dual Relay Wall Switch Vacancy Sensor with Nightlight The CS-350-N Passive Infrared (PIR) Dual Relay Vacancy Sensor provides automatic lighting shutoff for applications that require separate switching of two loads. It is engineered to comply with California’s Title 24-2008 residential energy code.

CS-50 PIR Wall Switch Vacancy Sensor The CS-50 Passive Infrared (PIR) Vacancy Sensor provides automatic shutoff for single-pole lighting control applications in the home. It is engineered to comply with California’s Title 24-2008 residential energy code.

CU-250 Ultrasonic Multi-way Wall Switch Vacancy Sensor The CU-250 Ultrasonic Multi-way Vacancy Sensor provides automatic lighting shutoff for applications in the home including those with multiple switch locations. It is engineered to comply with California’s Title 24-2008 residential energy code.

Decorator Seven-button Low Voltage Momentary Switch - LI The Decorator Seven-button Low Voltage Momentary Switch (DCC7) features a raise/lower paddle and five buttons to control any device that requires multiple contact closures. It is available in four colors, and is compatible with other Decorator style products, including the DCC2 Low Voltage Momentary Decorator Switch with LED.

Digital Lighting Management Digital Lighting Management (DLM) is an intelligent, distributed control system that automatically maximizes lighting energy efficiency. DLM includes room controllers, occupancy sensors, switches, daylighting sensors, plug load controls, interfaces and accessories that provide convenient, energysaving control of dimmed and switched loads. System components plug together with Category 5e cables with RJ45 connectors.

DLM Computer Interface Tools and Software The LMCI-100 Digital Computer to DLM interface connects to a PC’s USB port running the LMCS-100 Digital Lighting Management computer software and to a Digital Lighting management (DLM) system through the RJ45 connector. The computer tools allow users to read, store and modify DLM system configurations.

DLM Switch Button Kits and Switch Button Engraving The LMSW-KIT-100 Series and LMDM-KIT-101 are replacement button trim color kits that are compatible with all Digital Lighting Management (DLM) LMSW-100 Series switches and LMDM-101 Dimming Wall Switches. They are available with or without custom engraving.

DW-103 Dual Technology Multi-way Wall Switch Sensor The DW-103 dual technology multi-way wall switch sensor combines the benefits of passive infrared (PIR) and ultrasonic technologies turns lights ON and OFF based on occupancy. It provides high sensitivity to small and large movements, appealing aesthetics and a variety of features.

DW-203 Dual Technology Multi-way Dual Relay Wall Switch Sensor The DW-203 dual technology multi-way wall switch sensor combines the benefits of passive infrared (PIR) and ultrasonic technologies turns lights ON and OFF based on occupancy. It has two relays for controlling two independent lighting loads or circuits and a variety of features.

FD-301 Fixture Integrated Daylight Dimming Photosensor The FD-301 Fixture Integrated Daylight Dimming Photosensor is a low voltage controller that works with standard 0-10 VDC electronic dimming ballasts to control electric lighting in response to daylight.

FS-705/FS-755 Wide Angle PIR Occupancy Sensor The FS-705/FS-755 Wide Angle PIR Occupancy Sensors control lighting based on occupancy utilizing passive infrared (PIR) technology. The sensors provide 180 degree coverage and are designed for locations that require wide angle occupancy detection, such as refrigerator and freezer cases, vending machines and aisleway displays.

LI Complete Control Level Interior (LIC8, LIC24, LIC48, LICA8, LICA24, LICA48) The WattStopper Lighting Integrator Complete Control (LIC) system is a full featured networked control system that provides the maximum flexibility for lighting control by providing both panel based and distributed load control options. A digital communication bus allows user programming generated at the WinControl workstation to be transferred to the panels where it runs autonomously. Once loaded into the panels, the lighting automation features operate without the need for an online PC. This distributed processing capability ensures a high degree of reliability. LIC incorporates all the base features of the Lighting Integrator hardware platform including the HDR mechanically latching, heavy duty relay.

LightSaver® LS-102 Switching Photosensor The LS-102 Daylighting Controller is a single zone, on/off switching device designed to be installed in a closed loop application. A self-contained 24 VDC device with an extended range of 1-1400 footcandles, the LS-102 requires a low voltage power pack to operate. The controller consists of an advanced digital multi-band photosensor, an on-board microcontroller, and an LCD display. This photosensor is positioned behind a 100º cone that cuts off unwanted light, preventing false triggers.

LightSaver® LS-3C and LS-5C Wall Switches LightSaver Wall Switches allow occupants to temporarily override WattStopper’s automatic multizone daylighting control systems. The LS-3C provides ON/OFF switching for the LCO-203 and the LS-5C provides manual dimming and ON/OFF switching when used with LCD-203 controller.

LMCT-100 Digital Wireless Configuration Tool The LMCT-100 Wireless Digital Configuration Tool is a handheld tool for advanced remote configuration of any WattStopper Digital Lighting Management (DLM) system. The tool enables system and device modifications via pushbutton, without ladders or tools, as well as easily duplicating settings between DLM local networks.

LMDC-100 Digital Dual Technology Ceiling Mount Occupancy Sensor The LMDC-100 low profile Digital Dual Technology Ceiling Mount Occupancy Sensor uses both passive infrared (PIR) and ultrasonic technologies to achieve precise occupancy sensing for energy efficient control of lighting and plug loads. It is a digital sensor, and is part of a WattStopper Digital Lighting Management (DLM) system.

LMDM-101 Digital Dimming Wall Switch The LMDM-101 Digital Dimming Wall Switch is a low voltage device for dimming control of one or more lighting loads. It is part of a Digital Lighting Management (DLM) system and can dim load(s) connected to DLM dimming room controllers and switch load(s) connected to DLM on/off room controllers.

LMDX-100 Digital Dual Technology Corner Mount Occupancy Sensor The LMDX-100 Digital Dual Technology Corner Mount Occupancy Sensor uses both passive infrared (PIR) and ultrasonic technologies to achieve precise occupancy sensing for energy efficient control of lighting and plug loads. It is a digital sensor, and is part of a WattStopper Digital Lighting Management (DLM) system.

LMIO-101 Digital Input/Output Interface The LMIO-101 Digital Input/Output Interface allows seamless integration with third party devices to provide additional functionality in a Digital Lighting Management (DLM) system.

LMIR-100 Digital IR Ceiling Mount Receiver The LMIR-100 Digital IR Ceiling Mount Receiver provides an infrared (IR) interface so that Digital Lighting Management (DLM) IR remote controls can be used where DLM sensors or switches are not easily accessible for wireless communication.

LMLS-105 On/Off Photosensor The LMLS-105 On/Off Photosensor is a single zone switching device designed for closed loop daylighting applications. It includes an advanced digital multi-band photosensor positioned behind a 100° cone that cuts off unwanted light, preventing false triggers; an on-board microcontroller; and an LCD display. The LMLS-105 has an extended range of 1-1,400 footcandles and is an optional part of a WattStopper Digital Lighting Management (DLM) system.

LMLS-305 0-10 Volt Dimming Photosensor The LMLS-305 0-10 Volt Dimming Photosensor is a single zone ceiling-mounted device that works with standard 0-10 VDC electronic dimming ballasts to dim lighting as the ambient light level increases. It is an optional part of a WattStopper Digital Lighting Management (DLM) system and is designed for closed loop daylighting applications.

LMPC-100 Digital PIR Ceiling Mount Occupancy Sensor The LMPC-100 low profile Digital PIR Corner Mount Occupancy Sensor uses passive infrared (PIR) technology and one of two lenses to detect occupancy in different types of spaces for energy efficient control of lighting and plug loads. It is a digital sensor, and is part of a WattStopper Digital Lighting Management (DLM) system.

LMPL-101 Digital Plug Load Room Controller LMPL-101 Plug Load Room Controllers include a 20 amp relay for on/off control of connected outlets, and a high-efficiency switching power supply. They are part of a WattStopper Digital Lighting Management (DLM) system, and enable energy efficient control of plug loads.

LMPX-100 Digital PIR Corner Mount Occupancy Sensor The LMPX-100 Digital PIR Corner Mount Occupancy Sensor uses passive infrared (PIR) technology and one of four lenses to detect occupancy in different types of spaces for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a WattStopper Digital Lighting Management (DLM) system.

LMRC-100 Series Digital On/Off Room Controllers LMRC-100 Series Digital Room Controllers include one or two relay(s) for on/off control of a total of 20 amps, and a high-efficiency switching power supply. They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting sensors and switches for energy-efficient lighting control.

LMRC-210 Series Digital On/Off/0-10 Volt Dimming Room Controllers LMRC-210 Series Digital Room Controllers include one, two or three relay(s) to switch a total of 20 amps, a high-efficiency switching power supply and one 0-10 volt output per relay for control of dimmable loads including electronic ballasts (Advance Mark 7, or equivalent). They are the foundation of a WattStopper Digital Lighting Management (DLM) system, and allow integration of occupancy sensors, daylighting controls and switches for energy-efficient lighting control.

LMRH-101 Digital Dimming IR Remote Control The LMRH-101 Digital Dimming IR Remote Control is a handheld personal control device for convenient on/off and raise/lower control of any load(s) connected to Digital Lighting Management (DLM) dimming room controllers. It uses an infrared transceiver to communicate with a DLM system via any DLM IR-enabled devices.

LMRH-102 Digital 2-Button IR Remote Control The LMRH-102 Digital 2-Button IR Remote Control is a handheld on/off personal control device for convenient control of any loads connected to Digital Lighting Management (DLM) room controllers. It uses an infrared transceiver to communicate with a DLM system via any DLM IR-enabled devices.

LMRH-105 Digital Scene IR Remote Control The LMRH-105 Digital Scene IR Handheld Remote Control is a personal control device for convenient on/off and scene control. It is part of a Digital Lighting Management (DLM) system and controls loads connected to DLM room controllers by accessing four of the 16 scenes available in a DLM local network. It uses an infrared transceiver to communicate with a DLM system via any DLM IR-enabled devices.

LMRJ Series Pre-Terminated Cables and Accessories LMRJ series cables connect Digital Lighting Management (DLM) components without the need for tools or point-to-point discrete wiring. Cables are pre-terminated with industry standard RJ45 connectors compatible with any RJ45 port on DLM components. LMRJ cables utilize B to B wiring. A to A cables may be used instead, but all cabling on a project must be the same type for successful operation.

LMRL-100 Isolated Relay Interface The LMRL-100 Isolated Relay Interface is an optional component for a Digital Lighting Management (DLM) system. It enables seamless integration of third party devices such as HVAC systems or exhaust fans.

LMSW-100 Series Digital Wall Switches LMSW-100 Series Digital Wall Switches are low voltage devices for energy-saving manual on/ off control of one or more loads from one or more locations. They are part of a Digital Lighting Management (DLM) system and can control any load(s) connected to DLM room controllers.

LMSW-105 Digital 5-Button Scene Switch The LMSW-105 Digital Scene Switch is a low voltage device that sets and recalls preset lighting scenes and raises and lowers lighting levels. It is part of a Digital Lighting Management (DLM) system and controls loads connected to DLM room controllers by accessing four of the 16 scenes available in a DLM local network.

LMUC-100 Digital Ultrasonic Ceiling Mount Occupancy Sensor The LMUC-100 low profile Digital Dual Technology Ceiling Mount Occupancy Sensor uses ultrasonic diffusion technology to achieve 360° occupancy sensing for energy-efficient control of lighting and plug loads. It is a digital sensor, and is part of a WattStopper Digital Lighting Management (DLM) system.

Miro Decorator Seven-button Low Voltage Momentary Switch The Decorator Seven-button Low Voltage Momentary Switch (DCC7) features a raise/lower paddle and five buttons to control any device that requires multiple contact closures. It is available in four colors, and is compatible with other Decorator style products, including the DCC2 Low Voltage Momentary Decorator Switch with LED.

PW-100D Passive Infrared Dimmable Wall Switch Sensor The PW-100D passive infrared (PIR) dimmable wall switch sensor turns lights ON and OFF based on occupancy. It is characterized by high sensitivity to small and large movements, appealing aesthetics, and a variety of features.

PW-103N Passive Infrared Multi-way Wall Switch Sensor with Nightlight The PW-103N passive infrared (PIR) multi-way wall switch sensor turns lights ON and OFF based on occupancy. It provides high sensitivity to small and large movements, appealing aesthetics, a field selectable nightlight and a variety of features.

PW-203 Passive Infrared Multi-way Dual Relay Wall Switch Sensor The PW-203 passive infrared (PIR) multi-way wall switch sensor turns lights ON and OFF based on occupancy. It contains two relays for controlling two independent lighting loads and a variety of features.

RD-250 PIR Dimming Multi-way Wall Switch Convertible Occupancy Sensor The RD-250 PIR Dimming Multi-way Convertible Occupancy Sensor provides preset dimming control, automatic lighting shutoff and optional automatic lighting activation.

RS-250 PIR Wall Switch Convertible Occupancy Sensor The RS-250 Passive Infrared (PIR) Convertible Occupancy Sensor provides automatic lighting shutoff for single-pole lighting control applications in the home. It offers optional automatic lighting activation.

RT-100 Programmable Countdown Time Switch The RT-100 Programmable Countdown Time Switch automatically turns lighting or other loads off when the programmed on-time expires. It replaces standard single-pole wall switches for energy savings inside and outside the home.

RT-200 Astronomical Time Switch The RT-200 Astronomical Time Switch automatically turns lighting or other loads on and off according to user programming. It replaces standard single-pole wall switches for energy savings and security inside and outside the home.

WS-250 Passive Infrared Wall Switch Sensor The WS-250 Passive infrared (PIR) Wall Switch Sensor turns lighting on and off based on occupancy and ambient light level. It replaces existing wall switches and fits behind a standard decorator wall plate. The WS-250 improves on the WS-200, featuring a shallower housing, flying leads and new control button.